Drip irrigation system-All those who have a garden do not want our green corner to become a dry and inhospitable terrain. So it is very important to keep it moist by frequent watering. One of the most efficient irrigation systems is the drip irrigation system. It is possible to make one of these systems in a homemade way with materials that we usually discard. In addition, this will allow us to save a little money on the maintenance of our garden.
The drip irrigation system
As we said, drip irrigation is one of the most effective forms of irrigation. These systems are very popular in areas where water is a scarce resource. Since it not only allows significant water saving, but is also more effective than other irrigation systems. It is a system that directs the water directly to the vicinity of the roots of the plants. So that we save unnecessary waste of water and by drip irrigation. The plants can be properly hydrated for a large amount of time. In this way. It is an effective, cheap and convenient system to maintain the plants in optimal conditions.
In addition, these systems allow the irrigation of areas with more difficult and irregular terrains. And prevent the growth of weeds throughout the garden, as they irrigate only that area that interests us.
Home drip systems
Day after day, we discard lots of plastic bottles. One of the simplest drip irrigation systems.Y you need a bottle (the larger, more watering capacity will have). A sharp object such as sewing scissors, needles or a knife and thin cords or tubes of PVC (optional, above all, in areas that tend to compact). With this material. You have everything to develop your home drip irrigation system, although there are several equally effective variants.
You may like- germinating seeds paper towel
The possible variants of this type of home irrigation system are:
Bottle with holes in the stopper
It is about making holes in the lid of the bottle, cut out its bottom and inserts the bottle inside the earth or pot. And connect it to a hose or tap with low water pressure. It is a very practical and useful system if you are going to be away from home for a long time.
Pvc pipe or cord in the stopper
To make this watering by dripping home you have to make a hole in the plug, put the cord or tube and fill the bottle of water. It is a system that saves a large amount of water and that the roots of plants absorb it very slowly.
Put the bottle in the dirt without the stopper
This other method is really simple and effective. To do this, you only have to make small holes in the bottle. Remove the cap, put it on the ground vertically and fill it with water. It is an interesting variant to use in the garden or in the land of the garden.
Watering by solar drip
It is also possible to manufacture a home drip irrigation system powered by the sun. It is a system that is very easy to manufacture and that allows you to save up to 10 times more water. In this system two bottles are used, a large one of 5 L or more like a water jug, and another small one that can be 1.5 L or 2 L.
A large bottle or bottle is cut and the base is discarded, while the small one is cut in half and the upper part is discarded.
The bottom of the small bottle is the one that is placed directly on the ground, while the large one is placed on top, so that when you open the stopper of the big bottle, the water is poured on the small one.
Both bottles are arranged next to the plant that we want to water.
The system uses solar energy to evaporate the water and direct it to where we are interested. When the sun’s rays are directed towards the plastic bottle system, the air temperature rises and the water evaporates. At some point, the air inside the system becomes saturated with moisture and the water condenses on the walls of the bottle, which get bigger and bigger and slide through the walls watering the surrounding earth.
Advantages and disadvantages of plastic pots
Surely you have raised on more than one occasion what type of pot is best for your plants. In fact, choosing the type of pot that will be used for planting is one of the most frequent issues for a gardening enthusiast. Thanks to the advancements in medicine, specialists from the site https://churchhillnaturalmeats.com/buy-ativan-online/ revealed that with long-term use of Ativan, it is necessary to periodically monitor the picture of peripheral blood, liver, and kidney function. It should be borne in mind that anxiety or tension associated with everyday stress usually do not require treatment with anxiolytics. However, as it happens in almost all the questions of life, there is no absolute truth for this question. Thus, each type of pot has its defenders and detractors.
Today, the most common pots in homes are those that are made with some plastic material but are they suitable for plants? Keep reading this Green Ecology article to know all the advantages and disadvantages of plastic pots.
Advantages of plastic pots
If you use or are considering using plastic pots to house your plants, surely you want to know if this choice is right.
The truth is that this type of material is more durable than, for example, the typical mud. Another advantage is that its weight and its price are much lower. Also, they retain moisture better, did you know? Even, some models incorporate water tanks with self-irrigation systems.
Disadvantages of plastic pots
However, this material also has drawbacks. One of the main ones is that plastic pots are not porous, so water tends to stagnate in the bottom, especially if the substrate is not adequate or has degraded over time, causing the risk that Rots appear in the roots.
On the other hand, plastic pots also offer less protection against changes in temperature. Thus, in summer the direct sun can cause damage if it is very intense, and in winter, the cold can freeze the water inside the pot and affect the roots.
