Spread the love

When it’s time for your lawn mower to head out into the spring, here are a few things to do. First, check the spark plug for dirt and debris. If there’s any, clean it with a brake cleaner or a wire brush. Replace it if necessary. You should also replace the air filter, which can become dirty over time. Replace it if it’s paper or foam, and clean it according to your mower’s manual.

Image credit

While you’re at it, make a checklist of the things you need to check on your mower. A well-maintained mower will perform better, last longer, and be more reliable. To do this, refer to the owner’s manual and make a list of everything you need to do. Once you’ve done that, take a few minutes to service your mower before the season starts. You can also schedule a maintenance time.

To start, remove the spark plug and place a clean container beneath it. Follow the manufacturer’s instructions for the amount of oil you need and the grade of oil. Don’t overfill the oil, or you’ll damage the seals and overheat your mower. Always use the proper oil grade. If you’re unsure, check the owner’s manual or online for recommendations. This should be your first step.

Before you start your mower in the spring, you should make sure that the oil is at the proper level. Apply a little motor oil to the spark plug holes to prevent the spark plug from seizing in cold weather. You should also pull the cord a few inches to release the valves to prevent rust. After doing this, the mower should be ready for use on sunny, warm days. And a regular maintenance schedule will ensure that your mower is in top condition and ready to roll. For a range of Mountfield Parts, go to www.diyspareparts.com/parts/mountfield/

Image credit

Another step to service your mower is to change the spark plug. While spark plugs are relatively inexpensive and easy to replace, this process is important. This simple maintenance step will benefit your mower and ensure it runs smoothly. Similarly, air filters are necessary for keeping grass and dirt out of the engine. They usually come in a metal or plastic casing and need to be cleaned frequently. You can wipe them clean with warm soapy water and then air dry, but if they’re made of paper, they need to be replaced.

Leave a Reply

Your email address will not be published.